PHYSICAL SECURITY

Construction Site Security Cameras — Temporary, Solar-Powered, and Built for Active Job Sites

Construction sites lose an estimated $1 billion in equipment and materials every year across the U.S. Brivy IT deploys rapid-install, solar-powered camera systems with LTE connectivity — so your site is monitored from day one, even before utilities are connected.

CREDENTIALS & CERTIFICATIONS
Verkada Gold Plus PartnerSolar-Powered Camera DeploymentsLTE/Cellular ConnectivityOSHA Compliance MonitoringNight Vision & Thermal ImagingRapid 24-Hour DeploymentTime-Lapse Documentation
24hr
Typical Deployment Time
100%
Solar-Powered Options
4K
Resolution Cameras
24/7
Remote Monitoring
Construction sites are uniquely difficult to secure. They’re open, they change daily, there’s no permanent power, no wired internet, and high-value equipment sits outside overnight. Traditional security cameras don’t work here — they need power runs, network drops, and permanent mounting points that don’t exist on an active job site. Brivy IT specializes in temporary camera deployments built specifically for construction environments. Our systems run on solar power, connect over LTE cellular networks, and can be relocated as your site evolves. You get full remote viewing, AI-powered alerts, night vision, and time-lapse documentation — all without running a single cable.

Why Construction Sites Need Purpose-Built Camera Systems

Standard commercial camera systems fail on construction sites for predictable reasons. Here’s what we solve for every deployment.

No Power Available

Most job sites don't have permanent electrical service during early phases. Our solar-powered camera systems generate their own power and include battery backup for overnight and cloudy conditions.

No Internet Connection

Without wired internet, traditional cameras can't transmit footage. Our systems use LTE/cellular connectivity to stream live video and send alerts to your phone — no ISP required.

Constantly Changing Layout

As buildings go up and equipment moves, camera positions need to change. Our mobile trailer and pole-mount systems relocate in minutes, not days.

Overnight Theft & Vandalism

Equipment theft peaks between 6 PM and 6 AM. AI-powered night vision cameras with active deterrence detect intruders and trigger audible warnings before anything is taken.

OSHA Documentation

OSHA inspections require documentation of safety compliance. Our cameras provide continuous recording that serves as compliance evidence and liability protection.

Liability & Dispute Resolution

Time-lapse footage and continuous recording resolve disputes about project timelines, subcontractor activity, and on-site incidents — protecting your business from costly claims.

Our Construction Camera Solutions

We deploy three types of construction camera systems depending on your site size, phase, and budget.

Verkada MT81 Mobile Trailer

Our flagship construction security solution. The Verkada MT81 is a self-contained, solar-powered mobile surveillance trailer with multiple 4K cameras, LTE connectivity, built-in storage, and AI analytics. Tow it to your site, extend the mast, and you're live in under an hour. Learn more at /physical-security/trailer-cameras/.

Solar Pole-Mount Cameras

Individual solar-powered cameras mounted on temporary poles or existing structures. Ideal for supplementing trailer coverage or securing smaller sites. Each unit operates independently with its own solar panel, battery, and cellular modem.

Temporary Fixed Cameras

For sites with temporary power available, we deploy hardwired cameras on construction-grade mounts. These provide the highest resolution and most reliable connectivity when site infrastructure allows.

Camera Technology Partners

We select the right platform based on your project requirements, existing systems, and budget.

Verkada

Our primary construction camera platform. Cloud-native, AI-powered, with the MT81 mobile trailer purpose-built for job sites. Verkada cameras include built-in storage, so footage is preserved even if connectivity drops.

Lumana

AI overlay platform that can enhance existing cameras with intelligent analytics. Ideal for sites where you already have cameras but need smarter alerts and reduced false positives.

Rhombus

Cloud-managed cameras with strong multi-site management. Good fit for general contractors managing multiple active job sites from a single dashboard.

Turing

NDAA-compliant cameras with on-premise recording options. Selected for government-funded construction projects or sites with specific compliance requirements.

Key Features for Construction Site Monitoring

Every construction camera deployment from Brivy IT includes these capabilities.

Remote Live Viewing

Watch your job site live from your phone, tablet, or computer — anywhere with internet. Check on subcontractor activity, deliveries, and site conditions without driving to the site.

AI-Powered Alerts

Receive instant notifications for people, vehicles, or activity in restricted zones. AI filtering eliminates false alerts from animals, wind, and weather — you only get notified when it matters.

Night Vision & Thermal

Advanced IR and thermal imaging provides clear footage in complete darkness. See intruders, monitor equipment, and document overnight activity with the same clarity as daytime.

Time-Lapse Documentation

Automatic time-lapse captures your project from groundbreaking to completion. Use it for investor updates, marketing materials, dispute resolution, and project timeline documentation.

Weatherproof & Rugged

IP67-rated housings withstand rain, snow, dust, extreme heat, and below-zero Utah winters. These cameras are built for outdoor construction environments, not climate-controlled offices.

Two-Way Audio & Deterrence

Built-in speakers allow remote talk-down capability. When AI detects an intruder after hours, automated or live audio warnings can be triggered before police are even dispatched.

FROM THE FIELD

A commercial general contractor in Lehi was losing $15,000–$20,000 per month in copper wire theft across three active job sites. Traditional security guards covered one site at a time, and the sites had no power or internet during the foundation phase. We deployed Verkada MT81 mobile trailers at all three locations — solar-powered, LTE-connected, with AI detection zones covering material staging areas and equipment yards. Within the first week, the system detected and deterred two overnight intrusion attempts through automated audio warnings. Over the following six months, theft dropped to zero across all three sites. The contractor estimated the camera system paid for itself in the first 30 days.

GREAT FIT IF YOU…
  • Active construction site with no permanent power or internet
  • General contractor managing multiple job sites across Utah
  • High-value equipment and materials stored on site overnight
  • Need OSHA compliance documentation and time-lapse recording
  • Want remote visibility into job site activity from anywhere
  • Require rapid deployment — cameras operational within 24 hours
NOT THE BEST FIT IF YOU…
  • Permanent facility with existing power and wired internet — a traditional camera system is more cost-effective
  • Indoor-only monitoring with no outdoor or perimeter requirements
  • Very small project under 30 days where basic trail cameras may suffice
  • Site already has a functioning camera system that just needs maintenance

Construction Site Camera FAQs

How quickly can you deploy cameras to a new construction site?
Most deployments are operational within 24 hours. The Verkada MT81 mobile trailer can be towed to your site and fully operational in under an hour. Solar pole-mount cameras typically take a few hours to install and configure.
Do the cameras work without electricity or internet?
Yes. Our solar-powered systems generate their own electricity and include battery backup for overnight and overcast conditions. LTE cellular connectivity provides internet access without any wired infrastructure — no ISP, no cable runs, no trenching.
Can the cameras move as the construction site changes?
Absolutely. The MT81 trailer repositions in minutes — just retract the mast, tow it to the new location, and redeploy. Pole-mount cameras can be relocated in under an hour. This flexibility is a core feature of our construction camera systems.
What happens to footage if the cellular connection drops?
All cameras include local on-device storage. Footage is recorded and stored on the camera itself, then synced to the cloud when connectivity is restored. You never lose footage due to a temporary network interruption.
Can I share camera access with subcontractors or project managers?
Yes. Cloud-based platforms allow you to grant view-only or full access to specific cameras for specific time periods. Give your project manager live views without giving them system admin access.
How does this compare to hiring a security guard?
A single security guard covering one 8-hour shift costs $25–$40 per hour — roughly $6,000–$10,000 per month for one site. Our camera systems provide 24/7 coverage across your entire site for a fraction of that cost, with recorded evidence that a guard can't provide.

Your Job Site Doesn't Have to Be an Easy Target

Free site security assessment — we'll evaluate your construction site, recommend camera placement, and show you exactly what remote monitoring looks like.

Start the conversation with a free 10-minute consultation

Let’s discuss IT strategy, services, and business solutions & compliance concerns.

Copyright © 2026 Brivy LLC

Skip to content
We improve our products and advertising by using Microsoft Clarity, Google Analytics, and other tools to understand how you use our website. By using our site, you agree that we and our partners may collect and use this data. Our privacy policy has more details.